The manufacturing policy of inspection well mould is based on the specific drawing requirements or construction model of concrete circular well. From the perspective of structure, according to the different mechanical and manual operation, the number of blocks of inspection well mould circular well mould is different. The manufacturers of inspection well mould, electric inspection well mould and cable inspection well mould are especially for the ones with large diameter , similar to the reservoir like well body, the number of blocks has been very different from the ordinary inspection well. From the experience of Lefeng mould making inspection well mould, no matter how large the well is, the operation can be completed by mould prefabrication or on-site pouring.
The inspection well mold can be disassembled and divided into internal mold and external mold, which can be processed better. For example, as for the outer mold, it is made of the same two steel plates by welding, and it can also be assembled together by matching the bolts and snaps, while the inner mold is different from the outer mold. The inner mold is three different molds, one of which is small in model and presents the shape of a wedge as a whole, so that the mold can be made Better assembly and disassembly. Because during demoulding, the solidification of slurry will bring a lot of pressure to compress, and its external mold model is larger, which can be removed well. Compared with the internal mold, because it will be under a greater pressure, so we set one of the molds to the shape of wedge, so it will be very convenient and simple to operate. Some common inspection well mould models are between one meter and two meters in diameter. Of course, if they are too large, they will be very inconvenient in production, so the mould selection should be processed according to the actual situation.