Nowadays, more and more attention is paid to the municipal engineering construction, because the communication industry is more and more developed, and the smooth pipeline can ensure the smooth communication, so we have greatly increased the setting of inspection well, the inspection well mold is to make the work of the maintenance personnel more convenient and quick, as the urban infrastructure construction, is one of the development signs of the urbanization process, our city City managers should pay attention to the planning and construction of communication well pipeline, and improve its effect. The manufacture of inspection well mold depends on the specific model of each set of well body, because in the production of concrete inspection well, there are differences in the size of concrete inspection well used in different application projects, especially in the internal diameter. According to the production effect of prefabricated parts for different wells, they will be customized according to the needs of inspection wells. The inspection well mould is made by splicing the concrete inspection well moulds of different sizes and shapes through steel formwork. Generally, the formwork is required to be used normally for more than 3 years, so there is a strict limit standard for the manufacturer's production requirements.
So what are the production standards of inspection well mould that we usually call? From the actual use of templates, most of them are circular, a small number of square inspection well molds are used, so for example, according to the configuration standards of shaft, well body, connecting hole, etc., the size of the inner diameter will be indicated one by one. Generally, the inner diameter of the shaft part is 700, and the wall thickness is 8-15cm, while the inner diameter of the shaft part is more than 1m, and the inner diameter of the shaft part is 1 The wall thickness and connecting hole size of these types of inspection wells are different, which are mainly closely connected with the construction pipeline. The standard of making mold is based on the premise of accurate insertion and mold quality assurance. More importantly, it is necessary to improve mold production efficiency and reduce production costs, which can not only ensure the production interests of manufacturers, but also reduce the production costs of construction units.