The application of flume in the underground drainage pipeline can be said that there are many drainage flumes buried underground on all roads, some of which are leaky, such as outdoor activity places, parks, tourist attractions, etc. generally, the driving areas of roads, highways, tunnels, etc. are buried under the ground, and the upper ones are covered with cover plates or leaky grates, so the use area of drainage flume is wide Now. The gutter is prefabricated by the gutter mold. When the engineering party gives the corresponding drawings or dimensional requirements, we will give the corresponding quotation and three-dimensional drawings, so that the customers can understand the appearance of their products after they are made at the first time.
With the variety of flume mould becoming more and more diversified, the production of steel mould has become the main production mode, which needs to be operated in a dry environment during production, so as to prevent its rust. If the production is carried out in a humid environment, it will accelerate the aging of the mould, such as the production of prefabricated parts in a humid environment for a long time, which will lead to the whole process The mould of the water tank can be repaired, but many times of repair will also make the mould dangerous. So it is very important to use the mould correctly. We can choose the whole mould to be produced in a professional prefabrication factory, which not only ensures the safety of the mould, but also enables the prefabrication to be processed quickly, You can use it at ease. However, it should be noted that when the water tank mold is demoulded, the setting time of the mud will be affected by many factors, such as the current weather temperature, humidity and the amount of mud poured, etc., which will affect the forming of the prefabricated parts. The mold can be disassembled after the mud solidifies, and then the prefabrication construction can be carried out.