产品列表
路沿石钢模具
盖板钢模具
标志桩钢模具
隔离墩钢模具
化粪池钢模具
U型槽钢模具
遮板钢模具
道轨模具
护坡钢模具
制砖机
检查井钢模具
声屏障钢模具
防撞墙钢模具
围墙板模具
方涵模具
锚杆框架梁模具
配重块模具
水泥三盘模具
水泥预制件模具
      新闻中心
· 窖井模具的安装过程
· 拱形骨架模具的使用范围分析
· 化粪池模具的生产方式
· 井体模具的生产结构介绍
· 方井模具的结构特点和维护方...
· 矩形井模具的设计和脱模特点
      联系我们

电话:0312-8103818 18803129528
传真:0312-8103818
在线QQ:107108222
地址:保定市城东工业区

     新闻中心

防护栏模具的基本组成部分有哪些

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

防护栏模具使用起来是有很多优势的,首先是能够缩短铁路路基栅栏的生产时间,生产效率得到了提升,而且模具的使用是可以实现批量生产的,保证了生产出的铁路路基栅栏的外形基本相同,基本上没有次品的存在。防护栏模具,高速防护栏模具,高铁防护栏模具厂家是有立帽、立柱、上梁、下梁和栏片五部分组成的,在使用模具进行生产铁路路基栅栏时需要先将各个部件组装到一起形成一个类似栅栏状的结构才能投入使用,因为将原本体积较大的模具拆分成了各个组成部分,方便了模具的存储与运输,在节省空间方面起到了很重要的作用。

There are many advantages in the use of protective fence mold. First, it can shorten the production time of railway subgrade fence and improve the production efficiency. Moreover, the use of mold can realize mass production, ensuring that the appearance of the produced railway subgrade fence is basically the same and there is basically no defective product. The protective fence mould is composed of five parts, i.e. vertical cap, column, upper beam, lower beam and fence piece. When using the mould to produce railway subgrade fence, it is necessary to assemble all parts together to form a similar fence structure before it can be put into use. Because the original large mould is divided into various parts, which facilitates the storage and transportation of the mould and saves space It has played a very important role.

我厂对于防护栏模具的尺寸是有严格的规定的,用户是不可以根据自己的需求进行订制的。混凝土防护栏模具的高度有1.8米和2.2米两种类型,模具的长度一般都会根据地形的差异有所不同,比如在平地处模具的长度为3米每单元,而到了高低坎处,模具的长度就可以分为1.15米和1.59米两种类型。模具是由立帽、立柱、上梁、栏片和下梁五部分组成的,其中立帽和栏片是采用的工程塑料聚丙烯为生产原材料的。防护栏模具在生产要注意好对于模板的拼接,一般模板拼接都是使用了螺栓与卡扣进行组装调整,同样一定要保证好组装的严密性可以再组装完成后对防护栏模具进行简单的检查,比如说在模板内注入上一些清水检查是否有漏水的情况,接下来才可以将清水排出涂刷上油,浇筑泥浆后进行后续的振动以及脱模的工序。

Our factory has strict regulations on the size of the guard rail mold, and users can't customize it according to their own needs. There are two types of concrete guard rail mould: 1.8m and 2.2m. The length of mould is generally different according to the terrain. For example, the length of mould at flat ground is 3M per unit, while at high and low ridges, the length of mould can be divided into two types: 1.15m and 1.59M. The mold is composed of five parts: vertical cap, column, upper beam, fence piece and lower beam. The vertical cap and fence piece are made of engineering plastic polypropylene. Pay attention to the splicing of the formwork during the production of the guardrail mold. Generally, the splicing of the formwork uses bolts and clips for assembly and adjustment. Also, make sure that the tightness of the assembly can be ensured. After the completion of the reassembly, the guardrail mold can be simply inspected. For example, inject some clear water into the formwork to check whether there is water leakage, and then the clear water can be discharged and coated After applying oil and pouring mud, carry out subsequent vibration and demoulding process.


【上一个】 圆形井模具的设计和用料十分讲究 【下一个】 防护栏模板的使用特征


 · 防护栏模具的基本组成部分有哪些

检查井钢模具,检查井模具,预制检查井模具——保定乐丰钢模具厂 |隔离墩模具|流水槽模具|标志桩模具|检查井模具|隔离墩模具|化粪池模具|水泥防撞墙模具|护坡模具|排水沟模具|