The round well mould is widely used in drainage and water supply, electric power inspection and maintenance, gas pipeline maintenance, fire pipeline and other aspects. Its main role is to maintain the stability of the underground system and bring convenience to the development of the whole city. The concrete inspection well mould making inspection well is usually round. Occasionally, due to the different environment, the square well will be made. Because of its large volume and complicated manufacturing process, we should pay attention to the development of small details. The parts of the mould need to be fastened with screws. After assembly, they can be put into production. This kind of product is also very convenient to operate, so it is worth arousing me What we should pay attention to is the standardization of the die. The upper and lower edges of the steel die must be flat, and the thickness of the steel panel must be uniform, so that the inspection well can meet the specified size.
The production of round well mould is very picky in material selection, which often needs to be made of steel plate with higher hardness, so as to ensure that the produced mould can have a longer life in use, so that the mould manufacturer can have a stronger core competitiveness in the fierce mould market. The production of a set of round well chamber mould often needs to go through professional design, cutting, bending, welding and grinding. It not only needs high-quality materials, but also needs to formulate professional production plan according to the requirements of customers, and use advanced machines for operation. Therefore, after discussing with customers for preliminary planning and design, we should get specific mould drawings and make cutting plan Carry out production to save cost and reduce waste.
In order to make the production more efficient, the internal mold and the external mold will be divided into several small parts, which will save time and labor when workers carry and store. In order to facilitate the disassembly of the mold, the outer mold is composed of two or three steel plates. During the disassembly, only the clasps at the joints need to be opened and the steel plates need to be peeled. Because the outer side of the inner mold has been filled with mud when the mold is removed, the inner mold needs to be forced to the inner side and the wedge-shaped steel plate is used, which is also very convenient.