产品列表
路沿石钢模具
盖板钢模具
标志桩钢模具
隔离墩钢模具
化粪池钢模具
U型槽钢模具
遮板钢模具
道轨模具
护坡钢模具
制砖机
检查井钢模具
声屏障钢模具
防撞墙钢模具
围墙板模具
方涵模具
锚杆框架梁模具
配重块模具
水泥三盘模具
水泥预制件模具
      新闻中心
· 窖井模具的安装过程
· 拱形骨架模具的使用范围分析
· 化粪池模具的生产方式
· 井体模具的生产结构介绍
· 方井模具的结构特点和维护方...
· 矩形井模具的设计和脱模特点
      联系我们

电话:0312-8103818 18803129528
传真:0312-8103818
在线QQ:107108222
地址:保定市城东工业区

     新闻中心

矩形井模具的设计和脱模特点

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

矩形井模具的设计是按照装配式混凝土矩形检查井模具进行的,而矩形检查井模具作为同污水、雨水等检查井模板共同组成了这个类别。在排水井模具的生产中,对于模具制作非常重要。矩形检查井模具大样图是严格的实际标准,而在不同的模具规格中,模具的生产方式以及生产技术都是相同的。尽管排水井模板在制作上需要复杂的工序,但是生产出来后的模板,可以长期使用达5年之久,所以在模板的生产成本上可以忽略不计。所以如果考虑长期投资排水井预制件生产的话, 只要考虑混凝土以及人工成本就可以了。

The design of rectangular well mold is based on the prefabricated concrete rectangular inspection well mold, and the rectangular inspection well mold, as well as sewage, rainwater and other inspection well templates, constitutes this category. In the production of drainage well mould, it is very important for mould making. The mold detail drawing of rectangular inspection well is a strict practical standard, but in different mold specifications, the production mode and production technology of the mold are the same. Although the formwork of drainage well needs complex process in production, the formwork after production can be used for a long time of 5 years, so the production cost of formwork can be ignored. So if we consider long-term investment in the production of prefabricated drainage wells, we only need to consider the cost of concrete and labor.

矩形井模具首先脱模是注意的一个方面,在矩形井模具生产之前在模具的内壁涂上一层机油,是脱模快速的一个方法,还有就是检查井模具的存放问题,检查井模具也是具有生命的,在使用完成后,将检查井模具存放在阴凉,通风,没有化学物质的库房内,这是一个值得注意的问题,通过这些注意事项,检查井模具的使用时间很少可以使用5年以上是没有问题的,保养的好可以使用时间更长,检查井模具的很佳使用寿命也会达到理想的效果。在满足国内市场的同时也要多去开发国际市场,许多发达国家对我国的模具设备的需求也是在逐年增加,所以潜力很大。矩形井模具预埋筋正好处于两块模板的接缝处,装置模板时要在钢筋上缠上海绵条防止漏浆。

The first aspect of rectangular well demoulding is to pay attention to. Before the production of inspection well mould, a layer of engine oil is coated on the inner wall of mould, which is a quick method of demoulding. There is also the storage problem of inspection well mould. The inspection well mould also has life. After use, the inspection well mould is stored in a cool, ventilated warehouse without chemical substances, which is a value Problems to be noted, through these precautions, it is no problem that the service life of the inspection well mould is rarely used for more than 5 years, and it can be used for a longer time if it is well maintained. The good service life of the inspection well mould will also achieve the ideal effect. At the same time of meeting the domestic market, we should develop the international market more. Many developed countries are increasing the demand of our country's mold equipment year by year, so the potential is great. The embedded reinforcement of the rectangular well mould is just at the joint of the two formworks. When installing the formworks, the reinforcement shall be wrapped with Shanghai cotton strip to prevent leakage of slurry.


【上一个】 方井模具的结构特点和维护方式 【下一个】 圆形井模具的设计和用料十分讲究


 · 矩形井模具的设计和脱模特点

检查井钢模具,检查井模具,预制检查井模具——保定乐丰钢模具厂 |隔离墩模具|流水槽模具|标志桩模具|检查井模具|隔离墩模具|化粪池模具|水泥防撞墙模具|护坡模具|排水沟模具|