The production features of the septic tank mold are simple installation, quick demoulding speed and recyclable use. Compared with the traditional septic tank steel mold, it does not need too many installation steps. The mold product has high strength, smooth surface, good quality and long service life. Moreover, the size of the septic tank steel mold is standard and the error is small, which is widely recognized by users. Septic tank steel mold is generally divided into three sections, each section has a link channel to prevent dislocation. The production structure of the septic tank steel mold is combined. If the integrated synthetic production mode is selected, the production and production of the mold will increase the difficulty. Too large size will undoubtedly increase the difficulty of production. At the same time, the production of the cement product mold and the transportation in the production process will increase the difficulty. The transportation, installation, production and production cycle of the combined septic tank have been improved, which embodies the advantages of the combined septic tank mold.
The square cement septic tank mold has eight corners. The upper and lower parts of the mold are divided into three sections. Each section is 1m high, 2m inner diameter and 2.3m outer diameter. A complete set of septic tank mold includes internal and external mold, locating pin, concave convex groove, connecting hole, upper cover, material cap and hopper. The volume of cement septic tank produced is 12 cubic meters, which is a kind of cement septic tank mold commonly used by municipal, community and industrial enterprises. The production of septic tank needs a variety of accessories to cooperate. In addition to the overall main mold, it also needs a lot of accessories mold assistance. The production mode of prefabricated septic tank mold is prefabrication production. Concrete is poured into the septic tank template, and then vibration and air drying can wait for formwork removal. The process is very simple, but the construction also needs technology, especially the mastery of surface finish. According to the current needs of septic tanks, in addition to the conventional vertical, the new development of horizontal septic tanks is gradually expanding.