产品列表
路沿石钢模具
盖板钢模具
标志桩钢模具
隔离墩钢模具
化粪池钢模具
U型槽钢模具
遮板钢模具
道轨模具
护坡钢模具
制砖机
检查井钢模具
声屏障钢模具
防撞墙钢模具
围墙板模具
方涵模具
锚杆框架梁模具
配重块模具
水泥三盘模具
水泥预制件模具
      新闻中心
· 电力检查井模具的分类及介绍
· 排水井模具的详细数据及加工...
· 污水井模具如何正确合理的使...
· 圆井模具的制作工艺要求
· 矩形井模具的制作过程介绍
· 污水井模具的主要作用
      联系我们

电话:0312-8103818 18803129528
传真:0312-8103818
在线QQ:107108222
地址:保定市城东工业区

     新闻中心

水泥井模具的制作和分析

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

水泥井模具主要选用的是钢模具,如果选用钢模具每天的生产量是每天脱模一次,如果定制小尺寸的钢模具,可以一天脱模两次,钢模具选用的是半干料混凝土,可以等到水泥制品初凝以后就可以脱模,一般来说定制水泥井模具的数量比较少,检查井钢模具为了脱模方便,都是分截预制的,在使用过程中可以拼接使用,不同米数的产品就可以拼接使用,这样对于产品就有了更好的使用。

Steel mold is mainly used for cement well mold. If steel mold is selected, the production volume is demoulded once a day. If small-sized steel mold is customized, demoulding can be carried out twice a day. Semi dry concrete is selected for steel mold, and demoulding can be carried out after the initial setting of cement products. Generally speaking, the number of customized cement well mold is relatively small. In order to demould, the steel mold of inspection well can be demoulded The mold is convenient, and it is all cut and prefabricated. It can be spliced in the use process, and the products of different meters can be spliced, so that the products can be better used.

水泥井模具选用钢模具生产,水泥井只能选用钢模具进行生产,因为不同类型的钢模具,在安装生产过程中,也是不一样的,水泥井模具的不同类型,钢模具装配就如同组装机器一样,每一个部件,每个螺钉都不能出错,否则后果会相当严重,轻则导致产品缺陷,影响生产,重则彻底损害模具,造成报废。所以装配的活一定要非常的细致。

The cement well mold is produced by steel mold, and the cement well can only be produced by steel mold, because different types of steel mold are different in the process of installation and production. Different types of cement well mold, steel mold assembly is like assembly machine, each component and screw can not make mistakes, otherwise the consequences will be quite serious, and light will lead to product defects, Affect the production, seriously damage the mold, resulting in scrap. So the assembly work must be very meticulous.

关于模具的使用过程,尤其是要注意水泥井模具的清洁工作,钢模具生产出来的水泥制品没有塑料模具的光滑,所以对于钢模具光面的光滑程度也是不一样的,实际的生产过程,钢模具的表面光滑程度对模具质量的影响最小,水泥制品属于比较粗糙的模具,可能对于不同生产工艺的模具,要求也是不同的。

As for the use process of the mold, especially the cleaning work of the cement well mold, the cement products produced by the steel mold are not as smooth as the plastic mold, so the smooth degree of the steel mold is also different. In the actual production process, the smooth degree of the steel mold surface has the least impact on the quality of the mold. The cement products belong to the relatively rough mold, which may affect the quality of the mold In different production process of the mold, the requirements are different.


【上一个】 电力检查井模具的组成部分 【下一个】 检查井模具的施工流程介绍


 · 水泥井模具的制作和分析

检查井钢模具,检查井模具,预制检查井模具——保定乐丰钢模具厂 |隔离墩模具|排水沟模具|