产品列表
路沿石钢模具
盖板钢模具
标志桩钢模具
隔离墩钢模具
化粪池钢模具
U型槽钢模具
遮板钢模具
道轨模具
护坡钢模具
制砖机
检查井钢模具
声屏障钢模具
防撞墙钢模具
围墙板模具
方涵模具
锚杆框架梁模具
配重块模具
水泥三盘模具
水泥预制件模具
      新闻中心
· 检查井模具的施工工艺流程
· 排水井模具的使用过程简述
· 水泥检查井模具的使用过程介...
· 污水井模具的主要组成部分介...
· 检查井钢模具如何正确使用
· 排水井模具在使用中的注意事...
      联系我们

电话:0312-8103818 18803129528
传真:0312-8103818
在线QQ:107108222
地址:保定市城东工业区

     新闻中心

电力检查井模具的组成部分

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

电力检查井模具是一种安装埋置在地表以下土壤中与城市排水、排污管网相连接的配套设施,主要由井盖模具、井筒模具、井室模具、连接孔模具等组成.检查井排水高l效,污物不易滞留,减少堵塞.通用型电力检查井模具,电缆检查井模具,通讯检查井模具厂家规格:内径1米水泥观察井钢模具,外径1.2米,高1米,收口70公分,雨水检查井模具采用的钢板为4毫米厚,勒筋8毫米厚.

The electric power inspection well mould is a kind of supporting facility which is installed and buried in the soil below the surface and connected with the urban drainage and sewage pipe network, mainly composed of well cover mould, well bore mould, well chamber mould, connection hole mould, etc. the inspection well has high efficiency of drainage, and the dirt is not easy to stay, so as to reduce the blockage. Specifications of the universal electric inspection well mould manufacturer: 1 m inner diameter cement observation well steel mould, 1.2 m outer diameter, The height is 1 meter, and the closing is 70 cm. The steel plate used in the rain inspection well mould is 4 mm thick, and the rib is 8 mm thick

电力检查井模具是将生产出的电力井预制件需要投入到电力检修工程中去,像一些电线电缆设施的检修就需要用到电力井,因为这种模具制作而成的成品需要使用到一些大型的工程建设当中去,所以质量也是很重要的,在进行生产制作的时候就要尤其注意,乐丰模具制造工厂要注意选用优质的材料来进行制作,保质保量制作完成,保证后面的使用效果。对于模具要求很高就需要厂家对尺寸结构尤其注意,还需要考虑到钢材的一个厚度,厚度可以保持在4mm、6mm甚至8mm这样。电力井模具本身要求是比较高的,这种模具要求稳定性高,不易变形,能够承受住外界很多的压力,与电力管道紧密相连,只有这些要求全部达到才能保证电线电缆问题的及时解决。电力井模具是一种先进技术加工来模具,这种模具本身耗用的材料少,所以对这种模具的生产进一步的节省了许多材料,使资源得到了合理的利用,同时也节约了制作生产的时间,提高了效率,并且模具的使用也非常方便。

The electric power inspection well mold is to put the prefabricated parts of the electric power well into the electric power maintenance project. For example, the maintenance of some electric wire and cable facilities needs to use the electric power well. Because the finished products produced by this mold need to be used in some large-scale engineering construction, so the quality is also very important. During the production, we should pay special attention to the Lefeng mold The tool manufacturing plant should pay attention to the selection of high-quality materials for production, quality and quantity guaranteed, to ensure the use effect. For the mold with high requirements, the manufacturer should pay special attention to the size and structure, and also consider a thickness of steel, which can be kept at 4mm, 6mm or even 8mm. The requirements of power well mould itself are relatively high. This kind of mould requires high stability, is not easy to deform, can withstand a lot of external pressure, and is closely connected with the power pipeline. Only when all these requirements are met can the problem of wires and cables be solved in time. Power well mold is an advanced technology to process the mold, which consumes less materials, so the production of this mold further saves a lot of materials, makes a reasonable use of resources, saves production time, improves efficiency, and the use of the mold is very convenient.


【上一个】 检查井模具如何快速拆模 【下一个】 水泥井模具的制作和分析


 · 电缆检查井模具的结构及生产方式 · 电力检查井模具的分类及介绍
 · 电力检查井模具的组成部分

检查井钢模具,检查井模具,预制检查井模具——保定市晨泽模具制造有限公司 |隔离墩模具|排水沟模具|