污水井模具是以人工拆卸螺丝为主，采用行车拔模或者内外拆模的形式，将所需要的混凝土雨水井预制件生产出来，所以说对于雨水井模具而言，只有合理的挑选和科学的使用才能够生产出合格的预制件在地下进行埋放。为各种的设备提供安全放置的环境，并且为我们的生活带来很大的便利。而且在后来震动的处理过程中，因为震动工具是分为振动棒和振动平台的去呗，但是因为模具是不能够进行搬动的，所以震动棒的使用比较灵活可以照顾到，模具的每个边角位置，让泥浆振动的更加充分一些，然后等到泥浆凝固后就能够将模具拆开了。一般来说全新的雨水井模具，它的使用年限，是可以控制在三年内的在这个期间内，我们可以长时间的循环使用，并且使用完成后只需要简单的清理和养护就可以进行储存了。
Sewage well mold is mainly manual removal of screws, using the form of crane drawing or internal and external formwork removal to produce the required concrete rainwater well prefabricated parts. Therefore, for the rainwater well mold, only reasonable selection and scientific use can produce qualified prefabricated parts buried underground. Provide a safe environment for all kinds of equipment, and bring great convenience to our life. And in the subsequent vibration treatment process, because the vibration tool is divided into vibrator and vibration platform, but because the mold can not be moved, so the use of vibrator is more flexible, you can take care of each corner of the mold to make the mud vibrate more fully, and then the mold can be disassembled after the mud solidifies. Generally speaking, the service life of the new rainwater well mold can be controlled within three years. During this period, we can recycle for a long time, and after use, we only need simple cleaning and maintenance to store it.
污水井模具用的是钢模板焊接，虽然造价有了提高，相比之下，质量的改变更应该值得引起注意，钢模具的优势明显，做出来的混凝土预制产品密实度也是很高的，满足了检查井与管道衔接设计的要求，根据排水管道的大小和数量的不同所以有的时候排水井的设计也有不同，这是为了让排水的效果更好，有的还分成了上井室和下井室的组成部分，用部分带动整体的流动性更好，收水口是在井室和井圈之间的位置，作用就是调整井室内径尺寸，所以承压力也是经得住考验的。建成以后的排水检查井，我们应该经过检验合格后再使用，它的质量规格形状都应该符合规定。
The sewage well mold is welded with steel formwork. Although the cost has been improved, the quality change should be paid more attention. The advantages of steel mold are obvious, and the density of prefabricated concrete products is also very high, which meets the requirements of connection design between inspection well and pipeline. According to the size and quantity of drainage pipeline, sometimes the design of drainage well is designed There are also differences. This is to make the drainage effect better. Some of them are also divided into upper chamber and lower chamber, which can drive the overall fluidity better. The water inlet is located between the well chamber and the well circle, and its function is to adjust the inner diameter of the well chamber, so the bearing pressure can withstand the test. After the completion of the drainage inspection well, we should pass the inspection before using, its quality specification shape should meet the requirements.
打印