产品列表
路沿石钢模具
盖板钢模具
标志桩钢模具
隔离墩钢模具
化粪池钢模具
U型槽钢模具
遮板钢模具
道轨模具
护坡钢模具
制砖机
检查井钢模具
声屏障钢模具
防撞墙钢模具
围墙板模具
方涵模具
锚杆框架梁模具
配重块模具
水泥三盘模具
水泥预制件模具
      新闻中心
· 检查井模具的施工工艺流程
· 排水井模具的使用过程简述
· 水泥检查井模具的使用过程介...
· 污水井模具的主要组成部分介...
· 检查井钢模具如何正确使用
· 排水井模具在使用中的注意事...
      联系我们

电话:0312-8103818 18803129528
传真:0312-8103818
在线QQ:107108222
地址:保定市城东工业区

     新闻中心

污水井模具的主要组成部分介绍

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

污水井模具属于检查井模具的一种,整体是由三部分组成的:预留孔,调节圈,收口。预留孔是用来连接地下容易发生故障而定期需要检修与维护的地方,如地下管道接头,弯头处,电缆等等。中间部分是调节圈,调节圈顾名思义就是用来调节整个井体在地下的高度,能够适应各种安装深度要求,有效降低了安装成本。整个井体的最上面就是收口部分,收口是与地面相齐平最后加上与收口直径相同的井盖,这样整个埋在地下的检查井就和地面保持齐平了。

Sewage well mold is a kind of inspection well mold, the whole is composed of three parts: reserved hole, adjusting ring and closing. Reserved holes are used to connect underground places that are prone to failure and need regular maintenance, such as underground pipe joints, elbows, cables, etc. The middle part is the regulating ring, which, as the name implies, is used to adjust the height of the whole well in the underground, which can meet the requirements of various installation depths and effectively reduce the installation cost. The top part of the whole well body is the closing part, which is flush with the ground. Finally, a manhole cover with the same diameter as the closing in diameter is added, so that the whole buried inspection well is flush with the ground.
  
污水井模具目前还没有单一规定的尺寸,因为地区的不同,施工方案的不同,所使用的检查井也会不同一般的检查井模具都是根据客户需求所定制的,以目前来看定做最多尺寸的检查井模具内径为80公分和内经为1米的。 检查井模具的属于重型模具的一种,检查井预制件的体积也是比较大的,所以目前检查井模具还没有塑料的,玻璃钢模具成本相对又高,所以检查井模具一般以钢模具为主,生产的污水检查井模具材料全部采用优质的上等板材为主料,外加板筋做固定,加强主板硬度,有效提高了模具的使用寿命。

At present, there is no single specified size of the sewage well mold. Because of the different regions and construction schemes, the inspection wells used will be different. Generally, the inspection well molds are customized according to the needs of customers. At present, the inner diameter of the inspection well mold with the largest size is 80 cm and the inner diameter is 1 m. Inspection well mold belongs to a kind of heavy-duty mold, and the volume of prefabricated parts of inspection well is relatively large, so there is no plastic for inspection well mold at present, and the cost of FRP mold is relatively high. Therefore, the inspection well mold is generally made of steel mold, and the sewage inspection well mold materials are all made of high-quality plate as the main material, and the additional plate reinforcement is used to fix the main board The service life of the die is effectively improved.


【上一个】 水泥检查井模具的使用过程介绍 【下一个】 检查井钢模具如何正确使用


 · 污水井模具的主要组成部分介绍 · 污水井模具如何正确合理的使用
 · 污水井模具的主要作用

检查井钢模具,检查井模具,预制检查井模具——保定市晨泽模具制造有限公司 |隔离墩模具|排水沟模具|