产品列表
路沿石钢模具
盖板钢模具
标志桩钢模具
隔离墩钢模具
化粪池钢模具
U型槽钢模具
遮板钢模具
道轨模具
护坡钢模具
制砖机
检查井钢模具
声屏障钢模具
防撞墙钢模具
围墙板模具
方涵模具
锚杆框架梁模具
配重块模具
水泥三盘模具
水泥预制件模具
      新闻中心
· 关于检查井模具的常规知识
· 阶梯式护坡模具的制作流程
· 污水井模具使用的具体方法
· 水泥检查井模具的组成部分介...
· 检查井模具厂家祝大家牛年开...
· 预制井模具的成型方法
      联系我们

电话:0312-8103818 18803129528
传真:0312-8103818
在线QQ:107108222
地址:保定市城东工业区

     新闻中心

水泥检查井模具的组成部分介绍

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

水泥检查井模具整体分为三部分:预留孔,调节圈,收口。井体的底下是预留孔,预留孔是用来连接那些需要日后检修,与维护的地方,也是容易出现故障的地方。中间部分是调节圈,调节圈顾名思义就是用来调节整个井体在地下的高速,以适用各种安装环境,这样做能够有效的降低成本,提高效率。最上面是收口部分,就是与地面连接的地方,上面安装上与收口直径相同的井盖,这样一整套的检查井就安装完成了。

The mould for cement inspection well is divided into three parts: reserved hole, adjusting ring and necking. The bottom of the well body is a reserved hole, which is used to connect those places that need future repair and maintenance, and is also prone to failure. The middle part is the adjusting ring, which is used to adjust the underground high speed of the whole well body to adapt to various installation environments, which can effectively reduce the cost and improve the efficiency. The top is the closing part, which is the place connected with the ground. The manhole cover with the same diameter as the closing is installed on it, so that a complete set of inspection wells are installed.

水泥检查井模具的操作步骤是按照模具的常用外形来说,从厂家制作方面来讲,通常制作的检查井模具是非常有特征的,两侧带有孔,而且在制作检查井初期使用的钢板厚度是随着模具的规格大小变化的。无论是预制检查井渠还是现浇的检查井,都是按照客户提供的钢板要求进行下单。检查井模具由两部分组成,外模和内模。模具的尺寸大小可以根据要求定制。钢材外模使用两块厚实均匀的面板与强度高的筋板使用专业的电焊机进行焊接,做出来的外模稳定性好,非常牢固,在后期浇筑混凝土时不易变形、开裂,使用寿命较长,脱模较为方便、快捷。内模由三块钢板构成,一块尺寸小一些的,两块尺寸大点的,方便脱模。因为检查井在一些特殊工程中需求量会很大,可以根据提供的图纸进行加工,注意细节的问题,提前留出预留孔,进行大批量的生产。

The operation steps of the cement inspection well mold are according to the common shape of the mold. In terms of the manufacturer's production, the inspection well mold is usually very characteristic, with holes on both sides, and the thickness of the steel plate used in the initial stage of the production of the inspection well changes with the size of the mold. No matter prefabricated inspection well canal or cast-in-place inspection well, orders are placed according to the steel plate requirements provided by customers. The inspection well mould is composed of two parts, external mould and internal mould. Mold size can be customized according to the requirements. The steel external form uses two thick and uniform panels and high-strength reinforced plates, which are welded by professional electric welding machine. The external form has good stability and is very firm. It is not easy to deform and crack when pouring concrete in the later stage, and has a long service life. Demoulding is more convenient and fast. The internal mold is composed of three steel plates, one smaller and two larger, which is convenient for demoulding. Because inspection wells are in great demand in some special projects, they can be processed according to the drawings provided. Pay attention to the details and reserve holes in advance for mass production.


【上一个】 污水井模具使用的具体方法 【下一个】 检查井模具厂家祝大家牛年开工大吉


 · 水泥检查井模具的组成部分介绍 · 检查井模具厂家祝大家牛年开工大吉
 · 水泥检查井模具的使用过程介绍 · 预制检查井模具的使用过程及作用
 · 预制检查井模具的生产标准有哪些 · 预制检查井模具的制作步骤

检查井钢模具,检查井模具,水泥检查井模具——保定市晨泽模具制造有限公司 |隔离墩模具|排水沟模具|