产品列表
路沿石钢模具
盖板钢模具
标志桩钢模具
隔离墩钢模具
化粪池钢模具
U型槽钢模具
遮板钢模具
道轨模具
护坡钢模具
制砖机
检查井钢模具
声屏障钢模具
防撞墙钢模具
围墙板模具
方涵模具
锚杆框架梁模具
配重块模具
水泥三盘模具
水泥预制件模具
      新闻中心
· 关于检查井模具的常规知识
· 阶梯式护坡模具的制作流程
· 污水井模具使用的具体方法
· 水泥检查井模具的组成部分介...
· 检查井模具厂家祝大家牛年开...
· 预制井模具的成型方法
      联系我们

电话:0312-8103818 18803129528
传真:0312-8103818
在线QQ:107108222
地址:保定市城东工业区

     新闻中心

污水井模具使用的具体方法

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

污水井模具收口大小可以根据客户需求而定,一般会收到700mm,国标的井盖也是700mm。闸槽井钢模具的销量比较少,但是好多的市政工程也是离不开闸槽井的,由于闸槽井钢模具的尺寸规格比较大,所以我厂提供 以及售后服务。

The mold closing size of sewage well can be determined according to the customer's demand, generally 700mm, and the national standard well cover is 700mm. Gate well steel mold sales is relatively small, but a lot of municipal engineering is inseparable from the gate well, because the gate well steel mold size specification is relatively large, so I plant to provide and after-sales service.

污水井模具总高为150cm,井口钢模具高为50cm,污水闸槽井钢模具高为100cm,污水闸槽井内径100cm,外径120cm。污水闸槽井钢模具使用方法:先将污水闸槽井钢模具内腔喷一层机油,为了脱模方便,然后将搅拌好的水泥倒入模具中,用振动棒将其振动,等水泥初期凝固便可脱模,约24小时左右,操作非常简单。

The total height of mould for sewage well is 150cm, the height of steel mould for wellhead is 50cm, the height of steel mould for sewage sluice well is 100cm, the inner diameter of sewage sluice well is 100cm, and the outer diameter is 120cm. Usage of steel mould for sewage sluice well: first spray a layer of engine oil into the inner cavity of steel mould for sewage sluice well. For the convenience of demoulding, then pour the mixed cement into the mould and vibrate it with a vibrator. Demoulding can be done after the initial solidification of cement. It takes about 24 hours, and the operation is very simple.

使用污水井模具时候具体使用方法很简单,直接将混凝土放入污水检查井模具、圆形污水检查井模具中,通过震动平台来震动成型,放置24小时后可以脱模,但是这是正常情况下,一般天气比较寒冷的时候脱模时间会比较长,虽然操作比较简单,但是还需要一定的技巧。为了更好地实现污水检查井模具、现浇污水检查井模具的快速发展,在模具生产过程中应融入和利用好循环经济与绿色制造,在生产模具过程中应用尽量少的资源来创造尽量多的价值从而实现模具的回收再利用。

When using the sewage well mold, the specific use method is very simple. Put the concrete directly into the sewage inspection well mold and the circular sewage inspection well mold, and form the mold by vibrating the platform. After 24 hours, the mold can be demoulded. However, under normal circumstances, the demoulding time is relatively long when the weather is relatively cold. Although the operation is relatively simple, it still needs a certain amount of time skill. In order to better realize the rapid development of sewage inspection well mold and cast-in-place sewage inspection well mold, we should integrate and make good use of circular economy and green manufacturing in the mold production process, and use as few resources as possible to create as much value as possible in the mold production process, so as to realize the recycling of mold.


【上一个】 阶梯式护坡模具的制作流程 【下一个】 水泥检查井模具的组成部分介绍


 · 污水井模具使用的具体方法 · 污水井模具的生产制作过程
 · 污水井模具的主要组成部分介绍 · 污水井模具如何正确合理的使用
 · 污水井模具的主要作用

检查井钢模具,检查井模具,水泥检查井模具——保定市晨泽模具制造有限公司 |隔离墩模具|排水沟模具|