产品列表
路沿石钢模具
盖板钢模具
标志桩钢模具
隔离墩钢模具
化粪池钢模具
U型槽钢模具
遮板钢模具
道轨模具
护坡钢模具
制砖机
检查井钢模具
声屏障钢模具
防撞墙钢模具
围墙板模具
方涵模具
锚杆框架梁模具
配重块模具
水泥三盘模具
水泥预制件模具
      新闻中心
· 关于检查井模具的常规知识
· 阶梯式护坡模具的制作流程
· 污水井模具使用的具体方法
· 水泥检查井模具的组成部分介...
· 检查井模具厂家祝大家牛年开...
· 预制井模具的成型方法
      联系我们

电话:0312-8103818 18803129528
传真:0312-8103818
在线QQ:107108222
地址:保定市城东工业区

     新闻中心

阶梯式护坡模具的制作流程

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

阶梯式护坡模具是一种具有特色的模具,主要是用在河道路途的建设中,在河道建设中,这种模具生产的产品主要是起到保护的作用,所以我们对这种阶梯式护坡模具的施工要求十分的高,而且对这种模具的质量要求也是特别的高。要求阶梯式护坡模具的稳定性高,这样才能长时间的使用,而且在单次使用的时候,也不会出现变形的情况。对于这种模具的产品,我们要求是也非常高的,要求混凝土预制件的产品材质好,所以在刚开始进行调配混凝土的时候,我们就应该选择优质的材料,而且要按照一定的比例进行调配,这样生产出来的预制件色泽才会均匀,强度才能符合工程制作的要求。
一般这种模具生产制作阶梯式生态护坡的时候,制作的方法是非常简单的,因为这种模具的特殊结构是非常容易脱模的,而且模具强度高,一般都是可以进行周期性的使用,就算连续使用五次也不会有太大的变形,效果是非常好的。

Stepped slope protection mold is a kind of mold with characteristics, which is mainly used in the construction of river road. In the river construction, the products produced by this mold mainly play the role of protection, so we have very high requirements for the construction of this stepped slope protection mold, and the quality requirements of this mold are also very high. It is required that the stability of the stepped slope protection mold is high, so that it can be used for a long time, and the deformation will not appear when it is used for a single time. For this kind of mold products, we also have very high requirements. We require that the quality of precast concrete products is good. So at the beginning of concrete mixing, we should choose high-quality materials and mix them according to a certain proportion. Only in this way can the color of precast concrete be uniform and the strength meet the requirements of engineering production.

Generally, when this kind of mold is used to produce stepped ecological slope protection, the production method is very simple, because the special structure of this mold is very easy to demould, and the mold has high strength. Generally, it can be used periodically, even if it is used for five times, it will not have too much deformation, and the effect is very good.

阶梯式护坡模具需要按照正确的制作流程进行生产,这样制作的模具才能制作出合格的产品,在生产前需要进行设计,根据实际的施工情况,这样制作的产品可以很好的切合实际的施工情况,与各个部分可以结合的没有大的缝隙。这在使用时就不容易出现问题。设计的图纸一般是需要顾客自己进行提供的,阶梯式护坡模具的生产施工方只负责进行生产。将图纸交由工厂的工人进行加工,利用数控机床将整体的钢板进行切割,制作内模和外模,分为面板和筋板,这样制作的模具的质量有很大的提升,使用寿命很长,不需要经常地更换,这就给顾客省去了很多的麻烦,并且成本也会有所降低。因为在浇灌时会产生很大的压力,如果阶梯式护坡模具的抗压能力不足的话,就会出现形状上的变化或者是出现损坏的情况,所以就需要在面板上焊接筋板,这样在使用时就可以承受很大的压力,不容易损坏。焊接完成后的模具需要进行对内腔的打磨,这样可以保证内腔的光滑,在进行脱模时不容易出现粘连的情况。

The ladder type slope protection mold needs to be produced according to the correct production process. Only in this way can the mold be made into qualified products. It needs to be designed before production. According to the actual construction situation, the products made in this way can well meet the actual construction situation, and there is no big gap with each part. This is not easy to use problems. The design drawings generally need to be provided by the customers themselves, and the production and Construction Party of the stepped slope protection mold is only responsible for the production. The drawings are processed by the factory workers, and the whole steel plate is cut by the numerical control machine tool, and the internal mold and external mold are made, which are divided into panel and rib plate. In this way, the quality of the mold is greatly improved, the service life is very long, and it does not need to be replaced frequently, which saves customers a lot of trouble, and the cost will be reduced. Because there will be a lot of pressure when pouring, if the compressive capacity of the stepped slope protection mold is insufficient, there will be changes in shape or damage, so it is necessary to weld the rib plate on the panel, so that it can bear a lot of pressure and is not easy to damage. The mold after welding needs to polish the inner cavity, which can ensure the smoothness of the inner cavity and prevent adhesion during demoulding.


【上一个】 关于检查井模具的常规知识 【下一个】 污水井模具使用的具体方法


 · 阶梯式护坡模具的制作流程

检查井钢模具,检查井模具,水泥检查井模具——保定市晨泽模具制造有限公司 |隔离墩模具|排水沟模具|