产品列表
路沿石钢模具
盖板钢模具
标志桩钢模具
隔离墩钢模具
化粪池钢模具
U型槽钢模具
遮板钢模具
道轨模具
护坡钢模具
制砖机
检查井钢模具
声屏障钢模具
防撞墙钢模具
围墙板模具
方涵模具
锚杆框架梁模具
配重块模具
水泥三盘模具
水泥预制件模具
      新闻中心
· 检查井模具的整体结构及应用
· 一体式检查井模具的成型特点
· 整体式检查井模具的作用及结...
· 水泥检查井模具的优势特点
· 观察井模具的结构及特点
· 检查井模具的规格、尺寸、特...
      联系我们

电话:0312-8103818 18803129528
传真:0312-8103818
在线QQ:107108222
地址:保定市城东工业区

     新闻中心

路面板模具在道路施工中的重要性

[关闭该页][设为首页][添加收藏][发送朋友][打印][ ]

装配式路面板模具按样品加工 我厂生产混凝土道路板由强度为C25的混凝土与钢筋构成,混凝土路面板模具其结构为:所述的混凝土道路板呈门板状或扇形状,内设置有双层双向钢筋,且角部配置放射性加强钢筋,道路板正反两面的四个顶点内侧埋置四个吊点,道路板一侧上下分别开设两个凹口,凹口设置吊环。通过实施本实用新型,可节省大量资源、能源同时减少了因水泥生产及砂石开采造成的环境污染,经济效益显著提高,有利于项目降低成本、缩短施工周期,并有利于构件厂开发新型的建筑临时设施租赁业务,扩展经营渠道。该模具我们现在比较常见的长度就是3.8-4米左右高,在生产的时候可以进行拼接,延长长度,从而使生产出来的装配式道路板较长,稳定性更好一般都会按照客户的要求进行专门的定制生产,根据客户的要求完成模具的制作。

The concrete road slab is composed of C25 concrete and steel bars. The structure of the concrete road slab is as follows: the concrete road slab is in the shape of a door plate or a fan, with double-layer two-way steel bars inside, and the corners are equipped with radioactive reinforcing steel bars, and four lifting points are embedded inside the four top points on both sides of the road slab, Two notches are respectively set up on one side of the road board, and lifting rings are set in the notches. Through the implementation of the utility model, a large amount of resources and energy can be saved, and the environmental pollution caused by cement production and sand and gravel mining can be reduced at the same time. The economic benefit is significantly improved, which is conducive to reducing the cost of the project and shortening the construction period, and is also conducive to the development of new temporary building facilities leasing business and expanding the business channel for the component factory. The common length of the mold is about 3.8-4 meters. During the production, it can be spliced and extended, so that the fabricated road board is longer and more stable. Generally, it will be customized according to the customer's requirements, and the mold will be made according to the customer's requirements.

为了符合绿色施工的要求,开展建筑工程装配式可重复使用临时道路板开发与应用研究是有必要的。装配式临时便道具有可在项目结束或者场地有变动时,进行回收,移位处理。道路板安装是待板材达到80%强度之后采用小型吊车调运至需要的部位,进行快速吊装形成施工场地、临时道路的形成,满足施工现场文明施工硬化需求,同时待项目结束后,装配式混凝土板材可快速完成吊装、拆卸,没有噪音、扬尘污染,节约大量拆除费用。装配式混凝土临时道路较传统现浇式施工场地硬化更为便捷、环保、节能,符合绿色施工要求,符合可持续发展要求。

In order to meet the requirements of green construction, it is necessary to carry out the development and Application Research of prefabricated reusable temporary road slab. The prefabricated temporary access road can be recycled and displaced at the end of the project or when the site changes. The installation of road slab is to use small crane to transport the slab to the required position after reaching 80% strength for rapid hoisting to form construction site and temporary road, so as to meet the needs of civilized construction and hardening at construction site. At the same time, after the completion of the project, the prefabricated concrete slab can be quickly hoisted and dismantled without noise and dust pollution, saving a lot of demolition costs. Compared with the traditional cast-in-place construction site hardening, prefabricated concrete temporary road is more convenient, environmentally friendly and energy-saving, which meets the requirements of green construction and sustainable development.


【上一个】 检查井模具的规格、尺寸、特征 【下一个】 装配式路面板模具的施工方式


 · 路面板模具在道路施工中的重要性 · 装配式路面板模具的施工方式

检查井钢模具,检查井模具,水泥检查井模具——保定市晨泽模具制造有限公司 |隔离墩模具|排水沟模具|